Tank vs tankless: the most important choiceTank water heaters cost $720–$1,295 in Tempe — lower upfront, replace every 8–12 years. Tankless (on-demand) water heaters cost $1,295–$3,550 — last 20+ years and reduce energy use 24–34% for average families. The break-even on a tankless unit is typically 8–12 years. If you're planning to stay in the home, tankless is the economically superior choice for most Tempe households. If you're selling in 3–5 years, a standard tank is the practical option.
Fuel type: gas vs electric vs heat pumpGas water heaters cost less to operate in most Tempe markets but require a gas line. Electric resistance water heaters are higher operating cost but simpler to install. Heat pump water heaters (hybrid electric) qualify for a federal tax credit of up to $2,000 and are 2–3× more energy-efficient than electric resistance — the best long-term value for homes without gas. Confirm which fuel type your current heater uses and whether switching is feasible in your specific installation location.
Capacity must match household demandStandard tank sizes run 30, 40, 50, and 80 gallons. A 40-gallon tank serves 2–3 people adequately; 50 gallons for 3–4 people; 80 gallons for larger families. An undersized replacement is a common cost-cutting mistake that results in running out of hot water daily. Your installer should recommend a size based on household size and peak usage — not just replace the same size that was there before.
Permit required — but often skippedWater heater replacement technically requires a plumbing permit in most Tempe jurisdictions. Many installers skip this to speed up the job. While it's rarely enforced for a like-for-like replacement, unpermitted water heater installations can complicate homeowner's insurance claims for water damage and raise questions during home sale inspections. Ask whether a permit is included — a professional plumber will pull one.
Expansion tank, PRV, and code upgrades add to costNewer plumbing codes in Tempe and across the US require a thermal expansion tank on closed-loop water systems — these cost $50–$150 installed. If your pressure reducing valve (PRV) is old or out of spec, it may need replacement at the same time ($200–$400). These are legitimate code requirements, not upsells. An honest plumber discloses them upfront and explains why they're required.
Access and location affect installation costWater heaters in open utility rooms are the cheapest to replace. Units in closets, crawl spaces, attics, or requiring code-required upgrades to flue venting or gas line size add $200–$800+ to the total cost. Tankless units often require upgraded gas line diameter and dedicated electrical — confirm whether your existing infrastructure supports the unit being quoted. Surprises at installation time are the primary source of water heater budget overruns.