R-value requirement depends on your climate zoneIn San Bernardino, your climate zone determines the minimum R-value required for energy efficiency — typically R-38 to R-60 for attics in most US regions. Many homes in San Bernardino are under-insulated with R-11 to R-19. The cost difference between R-38 and R-60 is modest ($200–$500 on a standard attic) but the energy savings are significant. Ask your installer to specify what R-value they're quoting and compare it to your zone's recommendation.
Air sealing before insulating multiplies the returnAdding more insulation without first air-sealing the attic floor is one of the most common insulation mistakes. Air leaks around light fixtures, plumbing penetrations, and the attic hatch can undermine even R-60 insulation by allowing conditioned air to escape. Air sealing typically costs $300–$700 and dramatically improves the effectiveness of the insulation installed on top. A reputable installer will include air sealing as standard — ask if it's in the quote.
Blown-in vs batt: which is right for your atticBlown-in insulation (fibreglass or cellulose) is typically recommended for attic floors because it fills irregular spaces and settles around obstacles — cost in San Bernardino runs $1,100–$2,750. Batt insulation (fibreglass rolls) is less expensive but leaves gaps around joists, wiring, and pipes — reducing its effective R-value. Spray foam is used for specific applications (rim joists, cathedral ceilings) at higher cost. Confirm the method and material being quoted.
Existing insulation condition affects approachIf your existing insulation is contaminated (rodent droppings, mould, pest damage) or compressed and degraded, it must be removed before new insulation is added. Removal costs $1,000–$3,000 for a standard attic and is often discovered only after the installer accesses the space. Ask your contractor to inspect the existing insulation and confirm the removal cost scenario before finalising your quote.
Utility rebates significantly reduce net costMost utility companies serving San Bernardino offer rebates for attic insulation upgrades — typically $0.10–$0.20 per square foot or $200–$600 per home. Some programmes require installation by a participating contractor. Check your utility's energy efficiency programme before choosing an installer — programme-approved contractors can often apply the rebate directly, reducing your out-of-pocket cost at the time of installation.
Ventilation must not be blockedAttic insulation must not block soffit vents — the intake vents along your roofline that allow air to flow through the attic and prevent moisture buildup. Blocked vents lead to condensation, mould growth, and premature roof deck failure. Baffles (rafter vents) should be installed before blown-in insulation in any attic with soffit vents. Confirm this is included in your installer's approach — it's a basic competency test for any attic insulation contractor.